High-country-tek DVC80 Manual de usuario descargar pdf (Pagina 80)

P/N: 021-00154, Rev. A.6 - updated for V4.7 Tools Page | 80

6 DVC Expansion Modules

6.1 Introduction

The DVC5, DVC7 and DVC10 are programmable controllers. Each has a fixed number of Inputs and Outputs

for standalone operation. If your system requires more inputs or outputs than the DVC5/7/10 provide you have

two expansion options. Additional DVC5, DVC7 and DVC10s can be configured each as master controllers for

a portion of your application. Each DVC5, DVC7 and DVC10 will have their own application program and can

communicate with each other using an application specific CAN Bus message we will describe. In addition the

DVC7 and DVC10 (not the DVC5) can talk to other DVC expansion modules over the CAN Bus to expand your

specific input and output capabilities. It is important to note that if the system requires multiple modules of the

same model, specific module names and Mac ID# must be unique. For instance, if the system uses (2) DVC50

modules, one could be named dvc50_1 with a Mac ID of 50. The other could be named dvc50_2 with a Mac ID

of 51. At this time the DVC7 and DVC10 can talk to the following units:

DVC21 40 Sinking and Sourcing Digital Inputs

DVC22 40 Sinking Digital Inputs

DVC41 12 High Side Outputs for Bang-Bang Valves or LEDs

DVC50 3 Output Groups, 8 Digital, 3 Analog and 3 Universal I/Os similar to the DVC10

DVC61 4x20 character screen display with 12 display variables and 5 single

pole double throw digital inputs

DVC62 RS232 connected handheld 4X20 character display with a 20 button keypad for data

entry.

DVC65 2x20 Character Screen Output

DVC70 Memory module for Data Logging and Tracing

DVC80 J1939 CAN Bus Support

DVC5/7/10 to 5/7/10 The ability multiple DVC5, DVC7 and DVC10s to talk to each other

D206 RS232 connected Touch Screen Color Graphical Display

The following sections describe each of these modules.

6.2 DVC21

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 169 170

Sin comentarios

High-country-tek DVC80 Manual de usuario Pagina 80