High-country-tek DVC80 Manual de usuario descargar pdf (Pagina 51)

P/N: 021-00154, Rev. A.6 - updated for V4.7 Tools Page | 51

Name.LOS Loss of Signal flag set after time out. For

Universal Pulse inputs Only

False (Pulses ok), True (No

Pulse Input)

Name.RealRPM The Unsigned Integer Value of the RPM. For

Universal Pulse inputs Only

0 to 9999

Name.Counter Get/Set Unsigned Integer Value of the Counter.

Universal Pulse inputs Only

0 to 65535

Name.PulsesPerRev Get/Set Pulses Per Revolution 0 to 9999

Output Group Selected as Dual Coil High-Side

Name Description Range

(Low-Side/PWM) Name Set the state Current Target or

Process in percentage of min to max

current

0% to 100%

Name.Dir Set the coil to be PWM’d, *(use High

Side names to set the direction)

High-Side Odd # Name / High

Side Even # Name

Name.Enable Set the PWM to 0 or enable the PWM True [PWM Enabled], False

[PWM = 0]

Name.Short Get the Coil Flag for Short Status Off [Coil Ok], On [Coil Short]

Name.Open Get the Coil Flag for Open Status Off [Coil Ok], On [Coil Open]

HSEven#Name.Rampup Set the ramp up rate (time to travel

from 0% to 100%)

0.0 to 65.00 s

HSEven#Name.Rampdown Set the ramp down rate (time to travel

from 100% to 0%)

0.0 to 65.00 s

HSEven#Name.Short Get the Coil Flag for Short Status Off [Coil Ok], On [Coil Short]

HSEven#Name.Open Get the Coil Flag for Open Status Off [Coil Ok], On [Coil Open]

HSOdd#Name.Rampdown Set the ramp down rate (time to travel

from 100% to 0%)

0.0 to 65.00 s

HSOdd#Name.Short Get the Coil Flag for Short Status Off [Coil Ok], On [Coil Short]

HSOdd#Name.Open Get the Coil Flag for Open Status Off [Coil Ok], On [Coil Open]

Name.Cur Current actual * CurGain = amps 0 – 3.5 amps

Name.RampCur Ramped Current*CurGain= amps 0 – 3.5 amps

Name.CurErr Current Error = RampCur – Cur 16 bit signed integer

Name.CurSumErr Current Error accumulated over time 0 – 65535

Name.CurP Current Proportional Term Constant

“P”

0 – 255

Name.CurI Current Proportional Term Constant

“I”

0 – 255

Name.MinCurA Minimum Current Coil A *.001 = amps 0 – 3.5 amps

Name.MaxCurA Maximum Current Coil A *.001 =

amps

0 – 3.5 amps

Name.MinCurB Minimum Current Coil B *.001 = amps 0 – 3.5 amps

Name.MaxCurB Maximum Current Coil B *.001 =

amps

0 – 3.5 amps

Name.Config Configuration Word –Output,

Process, Coil

Name is the actual name entered in the Input/Output configuration window.

Scale depends on Input Range (0 to 5 =.00489, 0 to 10 = .00977, 0 to 25ma = 0.02158 )

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 169 170

Comentarios a estos manuales

Sin comentarios

High-country-tek DVC80 Manual de usuario Pagina 51

Comentarios a estos manuales

Relacionado con productos y manuales para Sensores High-country-tek DVC80