High-country-tek epc, Electronic Pump Controller - A Multi-Function Manual de usuario descargar pdf (Pagina 10)

023-00354-Rev1.6 evc/epc User Manual 10

evc/epc Controller

With SAE J1939 Interface

The evc/epc can be powered by a +5V USB to allow configuration without connecting to a 12/24VDC system. A

message Supply Voltage is Lowappears on the screen. The user may communicate, change, and save

settings to the unit without driving the coil(s).

At start up the GUI searches the PC communication ports for the evc/epc controller.

The MAC ID determines nd and Status PGN addresses on the SAE J1939 bus. The user may

command multiple evc/epc modules on a single SAE J1939 bus. Please see SAE J1939 section.

The default MAC ID is 1.

 or enter the   will locate the controller. It will restart the operation with the 

information and Mac .

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 44 45

Sin comentarios

High-country-tek epc, Electronic Pump Controller - A Multi-Function Manual de usuario Pagina 10